---
title: "TPO vs EPDM Commercial Roofing Compared | NEMA Roofing"
description: "TPO vs EPDM commercial roofing: seams, color, the California cool-roof rule, grease, flexibility and thickness compared, and when each membrane fits best."
url: "https://nemaroofing.com/commercial-roofing/rle-commercial-roofing-solutiong-astition/"
updated: "2026-09-30"
---

**TPO vs EPDM commercial roofing comes down to seams, color and what sits on the roof: TPO is a white thermoplastic sheet with heat-welded seams that meets California’s cool-roof values easily, while EPDM is a flexible synthetic rubber, usually black, with taped seams and a long record in every climate.** On most California commercial reroofs, reflective TPO is the simpler fit; EPDM makes sense where its flexibility or impact resistance matters and the cool-roof rule is met another way. To compare both on your building, call NEMA Roofing at [866-631-3366](tel:866-631-3366).

## How do TPO and EPDM compare?

|  | TPO (thermoplastic polyolefin) | EPDM (synthetic rubber) |
| --- | --- | --- |
| Material type | Thermoplastic: softens when heated, so seams can be welded | Thermoset rubber: cured, cannot be welded |
| Seams | Heat-welded; a good weld can be about as strong as the sheet | Seam tape and cover strips; quality depends on cleaning, priming and pressure |
| Usual color | White, highly reflective | Black as standard; reflective versions and coatings exist |
| California cool-roof rule on a reroof | White TPO is typically chosen to meet it directly; check the product’s aged rating | Black EPDM needs a rated reflective surface or the insulation trade-off |
| Grease and oil | Check the product’s rating near kitchen exhaust | Not resistant; keep away from food-preparation exhaust |
| Flexibility and movement | Stiffer sheet | Very flexible; tolerates building movement and temperature swings |
| Installation | Fully adhered or mechanically fastened | Fully adhered, mechanically fastened or ballasted |
| Repairs | Heat-welded patches on a cleaned surface | Primed patches with EPDM tape or cover strip |

## What does independent guidance say about each?

The U.S. Department of Defense roofing criteria (UFC 3-110-03) are a useful neutral reference because they do not sell either product:

- **EPDM** “provides predictable serviceability in roof systems in all climates”, but “is not resistant to grease and oil” and should not be installed near exhaust vents from food preparation areas. Fully adhered EPDM is the preferred installation, and fully adhered 90 mil EPDM is on the criteria’s list of covers that perform well in hail.
- **TPO and other weldable thermoplastics** can have seam strengths comparable to the sheet when properly heat welded, are often rated as cool roofs, and “may last 15 years or more” when properly constructed. Material costs are higher than bituminous roofing, while labor costs are generally lower.
- **Thickness matters for both.** For its own buildings the DoD specifies at least 72 mil TPO and at least 90 mil EPDM. Ask for the thickness in mils on any proposal.

## How does California’s cool-roof rule tip the choice?

California’s 2025 Energy Code sets aged cool-roof values for commercial low-slope reroofs in every climate zone, and they kick in once the work (tear-off, recover or recoat) goes beyond half the roof or beyond 2,000 square feet, whichever is the smaller area. White TPO is typically specified to meet that on its own. Black EPDM does not, so an EPDM reroof needs a rated white or laminated reflective EPDM, a rated coating, or the code’s trade-off that allows lower reflectance when the roof meets a stricter insulation value. Coatings add a maintenance item: the DoD criteria note that a field-applied coating on EPDM has to be renewed, and recommend a factory-laminated reflective surface instead because it lasts longer. See [energy efficient commercial roofing](https://nemaroofing.com/commercial-roofing/rele-eent-commercial-roofing-nfing/) for the full rule and its exceptions.

## When is TPO the better choice, and when is EPDM?

**TPO usually fits:**

- Large, simple low-slope roofs where reflectance and code compliance come first.
- Owners who prefer welded seams to taped ones.
- Buildings in hot inland areas where a white surface reduces cooling load.

**EPDM usually fits:**

- Roofs with a lot of movement, irregular shapes, or where a flexible sheet is easier to detail.
- Recovers and repairs of existing EPDM roofs, where matching the system keeps repairs simple.
- Buildings where the cool-roof rule is met through a reflective EPDM product or the insulation trade-off.

**Neither fits well** around restaurant exhaust fans, where PVC or another grease-rated membrane is the usual answer, or on roofs with heavy foot traffic, where a multi-ply modified bitumen system or generous walkway pads protect the waterproofing better. For the wider field of options, see [commercial roofing materials: pros, cons and best uses](https://nemaroofing.com/commercial-roofing/top-commercial-roofing-materials-pros-cons-and-best-uses/).

## What should a TPO or EPDM proposal specify?

1. Membrane manufacturer, product line, color and thickness in mils.
2. Attachment: fully adhered, mechanically fastened or ballasted, and the fastening pattern at edges and corners.
3. Insulation type and thickness, and a cover board.
4. Seam method: welded (TPO) or taped with cover strips (EPDM), and how seams are tested.
5. Flashings at walls, curbs, drains and penetrations, and new edge metal.
6. The product’s aged cool-roof rating, or how the code requirement is met.
7. The warranty type, and who stands behind workmanship.

Both membranes are low-slope systems; our [flat roofing service](https://nemaroofing.com/our-services/flat-roofing/) covers them on smaller buildings as well.

NEMA Roofing offers TPO and EPDM roofing for commercial buildings wherever we work: all of Riverside, San Bernardino, Los Angeles, Ventura and Santa Barbara counties, served from our Downey, Tarzana, Woodland Hills, Oxnard and Santa Barbara locations so a crew is never far from your building ([Ventura County](https://nemaroofing.com/service-areas/ventura-county/) is one example). See our [commercial roofing service](https://nemaroofing.com/our-services/commercial-roofing/), or call [866-631-3366](tel:866-631-3366) to compare TPO and EPDM for your roof.